/**@file

 @copyright
  INTEL CONFIDENTIAL
  Copyright 2009 - 2017 Intel Corporation.

  The source code contained or described herein and all documents related to the
  source code ("Material") are owned by Intel Corporation or its suppliers or
  licensors. Title to the Material remains with Intel Corporation or its suppliers
  and licensors. The Material may contain trade secrets and proprietary and
  confidential information of Intel Corporation and its suppliers and licensors,
  and is protected by worldwide copyright and trade secret laws and treaty
  provisions. No part of the Material may be used, copied, reproduced, modified,
  published, uploaded, posted, transmitted, distributed, or disclosed in any way
  without Intel's prior express written permission.

  No license under any patent, copyright, trade secret or other intellectual
  property right is granted to or conferred upon you by disclosure or delivery
  of the Materials, either expressly, by implication, inducement, estoppel or
  otherwise. Any license under such intellectual property rights must be
  express and approved by Intel in writing.

  Unless otherwise agreed by Intel in writing, you may not remove or alter
  this notice or any other notice embedded in Materials by Intel or
  Intel's suppliers or licensors in any way.

  This file contains a 'Sample Driver' and is licensed as such under the terms
  of your license agreement with Intel or your vendor. This file may be modified
  by the user, subject to the additional terms of the license agreement.

@par Specification
**/

//
// Name:	SIO.UNI
//
// Description:	SIO Form String Definitions
//
//**********************************************************************
/=#
#include "VFR.uni"
#string STR_NAT_SIO_FORM                        #language en-US "Super IO NAT87393V Configuration"
#string STR_SIO_FORM_HELP                       #language en-US "System Super IO Chip Parameters"
#string STR_SIO_PROMPT                          #language en-US "Super IO Chip"
#string STR_NAT87393                            #language en-US "NAT 87393"

//
//Floppy Settings
//
#string STR_NAT_FLOPPY_FORM                     #language en-US "Floppy Disk Controller Configuration"
#string STR_NAT_FLOPPY_FORM_HELP                #language en-US "Set Parameters of Floppy Disk Controller (FDC)."
#string STR_NAT_FLOPPY_PROMPT                   #language en-US "Floppy Disk Controller"
#string STR_NAT_FLOPPY_PROMPT_HELP              #language en-US "Enable or Disable Floppy Disk Controller."
#string STR_NAT_FLOPPY_MODE_HELP                #language en-US "Change Mode of Floppy Disk Controller. Select <Read Write> mode for Normal operation. Select <Write Protect> mode for Readonly operation."
#string STR_NAT_FLOPPY_MODE1                    #language en-US "Read Write"
#string STR_NAT_FLOPPY_MODE2                    #language en-US "Write Protect"
#string STR_NAT_FLOPPY_CONFIG_VALUE             #language en-US "    Unkown    "

#string STR_NAT_FLOPPY_SETTINGS1                #language en-US "IO=3F0h; IRQ=6; DMA=2"
#string STR_NAT_FLOPPY_SETTINGS2                #language en-US "IO=3F0h; IRQ=3,4,5,6,7,10,12; DMA=1,2,3;"
#string STR_NAT_FLOPPY_SETTINGS3                #language en-US "IO=370h; IRQ=3,4,5,6,7,10,12; DMA=1,2,3;"

//Serial 0/1 Settings
#string STR_SERIAL0_FORM                        #language en-US "Serial Port 0 Configuration"
#string STR_SERIAL0_FORM_HELP                   #language en-US "Set Parameters of Serial Port 0 (COMA)."
#string STR_SERIAL1_FORM                        #language en-US "Serial Port 1 Configuration"
#string STR_SERIAL1_FORM_HELP                   #language en-US "Set Parameters of Serial Port 1 (COMB)."
#string STR_NAT_SERIAL_PROMPT                   #language en-US "Serial Port"
#string STR_SERIAL_PROMPT_HELP                  #language en-US "Enable or Disable Serial Port (COM)."
#string STR_SERIAL_MODE1                        #language en-US "Normal"
#string STR_SERIAL_MODE2                        #language en-US "High Speed"
#string STR_SERIAL_MODE_HELP                    #language en-US "Change the Serial Port mode. Select <High Speed> or <Normal mode> mode."
#string STR_NAT_SERIAL0_CONFIG_VALUE            #language en-US "    Unkown    "
#string STR_SERIAL1_CONFIG_VALUE                #language en-US "    Unkown    "

#string STR_NAT_SERIAL_SETTINGS1                #language en-US "IO=2E8h; IRQ=3;"
#string STR_NAT_SERIAL_SETTINGS2                #language en-US "IO=3F8h; IRQ=3,4,5,6,7,10,11,12;"
#string STR_NAT_SERIAL_SETTINGS3                #language en-US "IO=2F8h; IRQ=3,4,5,6,7,10,11,12;"
#string STR_NAT_SERIAL_SETTINGS4                #language en-US "IO=3E8h; IRQ=3,4,5,6,7,10,11,12;"
#string STR_NAT_SERIAL_SETTINGS5                #language en-US "IO=2E8h; IRQ=3,4,5,6,7,10,11,12;"


//Parallel Settings
#string STR_PARALLEL_FORM                       #language en-US "Parallel Port Configuration"
#string STR_PARALLEL_FORM_HELP                  #language en-US "Set Parameters of Parallel Port (LPT/LPTE)."

#string STR_NAT_PARALLEL_PROMPT                 #language en-US "Parallel Port"
#string STR_PARALLEL_PROMPT_HELP                #language en-US "Enable or Disable Parallel Port (LPT/LPTE)."

#string STR_PARALLEL_MODE1                      #language en-US "STD Printer Mode"
#string STR_PARALLEL_MODE2                      #language en-US "SPP Mode"
#string STR_PARALLEL_MODE3                      #language en-US "EPP-1.9"
#string STR_PARALLEL_MODE4                      #language en-US "EPP-1.7"
#string STR_PARALLEL_MODE5                      #language en-US "ECP Mode"
#string STR_PARALLEL_MODE6                      #language en-US "ECP and EPP 1.9 Mode"
#string STR_PARALLEL_MODE7                      #language en-US "ECP and EPP 1.7 Mode"
#string STR_NAT_PARALLEL_CONFIG_VALUE           #language en-US "    Unkown    "
#string STR_PARALLEL_CONFIG_VALUE               #language en-US "Reset Required"
#string STR_PARALLEL_MODE_HELP                  #language en-US "Change the Printer Port mode."


#string STR_PARALLEL_SETTINGS1                  #language en-US "IO=378h; IRQ=7;"
#string STR_PARALLEL_SETTINGS2                  #language en-US "IO=278h; IRQ=7;"
#string STR_PARALLEL_SETTINGS3                  #language en-US "IO=3BCh; IRQ=7;"
#string STR_PARALLEL_SETTINGS4                  #language en-US "IO=378h; IRQ=5;"
#string STR_PARALLEL_SETTINGS5                  #language en-US "IO=278h; IRQ=5;"
#string STR_PARALLEL_SETTINGS6                  #language en-US "IO=3BCh; IRQ=5;"

#string STR_PARALLELECP_SETTINGS1               #language en-US "IO=378h; IRQ=7; DMA=3;"
#string STR_PARALLELECP_SETTINGS2               #language en-US "IO=278h; IRQ=7; DMA=1,2,3;"
#string STR_PARALLELECP_SETTINGS3               #language en-US "IO=378h; IRQ=5; DMA=1,2,3;"


#string STR_PARALLELEPP_SETTINGS1               #language en-US "IO=378h; IRQ=7;"
#string STR_PARALLELEPP_SETTINGS2               #language en-US "IO=278h; IRQ=7;"
#string STR_PARALLELEPP_SETTINGS3               #language en-US "IO=378h; IRQ=5;"
#string STR_PARALLELEPP_SETTINGS4               #language en-US "IO=278h; IRQ=5;"


//PME Settings
#string STR_PME_WAKE_FROM_KEY                   #language en-US "Wake on Specific Key"


//Generic 
#string STR_SETTINGS_HELP                       #language en-US "Select an optimal settings for Super IO Device."
#string STR_AUTO                                #language en-US "Auto"
#string STR_NAT_COM_CHANGE_CONFIG               #language en-US "Change Settings"
#string STR_NAT_LPT_CHANGE_CONFIG               #language en-US "Change Settings"
#string STR_CURRENT_CONFIG                      #language en-US "Device Settings"
#string STR_NAT_COM_SELECT_MODE                 #language en-US "Device Mode"
#string STR_NAT_LPT_SELECT_MODE                 #language en-US "Device Mode"
#string STR_ENABLED                             #language en-US "Enabled"
#string STR_DISABLED                            #language en-US "Disabled"