alder_lake_bios/Insyde/InsydeModulePkg/Library/Tpm2DeviceLibPpiBased/PeiTpm2Tis.c

114 lines
4.2 KiB
C

/** @file
This library abstract how to access TPM2 hardware device.
;******************************************************************************
;* Copyright (c) 2014 - 2015, Insyde Software Corp. All Rights Reserved.
;*
;* You may not reproduce, distribute, publish, display, perform, modify, adapt,
;* transmit, broadcast, present, recite, release, license or otherwise exploit
;* any part of this publication in any form, by any means, without the prior
;* written permission of Insyde Software Corporation.
;*
;******************************************************************************
*/
#include <Library/DebugLib.h>
#include <Library/Tpm2DeviceLib.h>
#include <Library/PeiServicesTablePointerLib.h>
#include <Ppi/Tpm2InterfacePei.h>
#include <IndustryStandard/Tpm20.h>
/**
This service enables the sending of commands to the TPM2.
@param[in] InputParameterBlockSize Size of the TPM2 input parameter block.
@param[in] InputParameterBlock Pointer to the TPM2 input parameter block.
@param[in,out] OutputParameterBlockSize Size of the TPM2 output parameter block.
@param[in] OutputParameterBlock Pointer to the TPM2 output parameter block.
@retval EFI_SUCCESS The command byte stream was successfully sent to the device and a response was successfully received.
@retval EFI_DEVICE_ERROR The command was not successfully sent to the device or a response was not successfully received from the device.
@retval EFI_BUFFER_TOO_SMALL The output parameter block is too small.
@retval EFI_INVALID_PARAMETER PeiServices not found.
@retval EFI_UNSUPPORTED PEI_TPM2_INTERFACE_PPI not found.
**/
EFI_STATUS
EFIAPI
PpiBasedTpm2SubmitCommand (
IN UINT32 InputParameterBlockSize,
IN UINT8 *InputParameterBlock,
IN OUT UINT32 *OutputParameterBlockSize,
IN UINT8 *OutputParameterBlock
)
{
EFI_STATUS Status;
EFI_PEI_PPI_DESCRIPTOR *Tpm2InterfaceDescriptor;
PEI_TPM2_INTERFACE_PPI *Tpm2Interface;
EFI_PEI_SERVICES **PeiServices;
PeiServices = (EFI_PEI_SERVICES **)GetPeiServicesTablePointer ();
if (PeiServices == NULL) {
return EFI_INVALID_PARAMETER;
}
Status = (**PeiServices).LocatePpi (
(CONST EFI_PEI_SERVICES **)PeiServices,
&gPeiTpm2InterfacePpiGuid,
0,
&Tpm2InterfaceDescriptor,
(VOID **)&Tpm2Interface
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Tpm2Interface Error!\n"));
return EFI_UNSUPPORTED;
}
return Tpm2Interface->SummitCommand (
PeiServices,
Tpm2Interface,
InputParameterBlock,
InputParameterBlockSize,
OutputParameterBlock,
OutputParameterBlockSize
);
}
/**
This service requests use TPM2.
@retval EFI_SUCCESS Get the control of TPM2 chip.
@retval EFI_NOT_FOUND TPM2 not found.
@retval EFI_DEVICE_ERROR Unexpected device behavior.
@retval EFI_INVALID_PARAMETER PeiServices not found.
@retval EFI_UNSUPPORTED PEI_TPM2_INTERFACE_PPI not found.
**/
EFI_STATUS
EFIAPI
PpiBasedTpm2RequestUseTpm (
VOID
)
{
EFI_STATUS Status;
EFI_PEI_PPI_DESCRIPTOR *Tpm2InterfaceDescriptor;
PEI_TPM2_INTERFACE_PPI *Tpm2Interface;
EFI_PEI_SERVICES **PeiServices;
PeiServices = (EFI_PEI_SERVICES **)GetPeiServicesTablePointer ();
if (PeiServices == NULL) {
return EFI_INVALID_PARAMETER;
}
Status = (**PeiServices).LocatePpi (
(CONST EFI_PEI_SERVICES **)PeiServices,
&gPeiTpm2InterfacePpiGuid,
0,
&Tpm2InterfaceDescriptor,
(VOID **)&Tpm2Interface
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Tpm2Interface Error!\n"));
return EFI_UNSUPPORTED;
}
return Tpm2Interface->RequestUse (PeiServices, Tpm2Interface);
}