xinb
/
alder_lake_bios
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
alder_lake_bios/Intel/AlderLake/AlderLakeChipsetPkg/HybridGraphicsAcpi/AmdUltPowerXpress/Atpx.asl

673 lines
34 KiB
Plaintext
Raw Permalink Blame History

/** @file
;******************************************************************************
;* Copyright (c) 2018 - 2019, Insyde Software Corp. All Rights Reserved.
;*
;* You may not reproduce, distribute, publish, display, perform, modify, adapt,
;* transmit, broadcast, present, recite, release, license or otherwise exploit
;* any part of this publication in any form, by any means, without the prior
;* written permission of Insyde Software Corporation.
;*
;******************************************************************************
*/
Scope (IGPU_SCOPE)
{
//
// Hybrid Graphics ACPI Control
// Methods and Notifications
// Rev. 0.27
//
// ATI PowerXpress (PX) Contrl Method: ATPX
//
// This is PowerXpress specific Control Method used by integrated graphics or discrete
// graphics driver on PowerXpress enabled platforms. The existence of this method indicates
// support for PowerXpress. This method provides multiple functions that can be
// invoked by the display driver. The general format of this method is as follows.
//
// Arguments:
//
// Arg0 (ACPI_INTEGER): Function code
// Arg1 (ACPI_BUFFER): Parameter buffer, 256 bytes
//
// Output:
//
// (ACPI_BUFFER): 256 bytes.
//
// Arg0 parameter may define the following values (only lower 32bit used):
//
Method (ATPX, 2, Serialized)
{
//
// Function 0 (Verify PowerXpress Interface)
//
// This function provides interface version and functions supported by PowerXpress System BIOS.
// It is a required function, if any other ATPX functions are supported by System BIOS.
//
// Arguments:
//
// Arg0: Function code
// Arg1: None
//
// Output:
//
// Structure data containing the following info:
//
// ===================================================================================================
// || Field || Format || Description ||
// ===================================================================================================
// || Structure Size || WORD || Structure size in bytes including the Structure Size field. ||
// ||-------------------||--------||----------------------------------------------------------------||
// || Interface || WORD || 16-bit interface version. Must be set to 1. ||
// || Version || || ||
// ||-------------------||--------||----------------------------------------------------------------||
// || Supported || DWORD || Bit vector providing supported functions information. Each bit ||
// || Functions Bit || || marks support for one specific function of the ATPX method. ||
// || Vector || || Bit n, if set, indicates that Function n+1 is supported. ||
// ===================================================================================================
//
If (LEqual (Arg0, PX_VERIFY_POWERXPRESS_INTERFACE))
{
Name (TMP1, Buffer(256) {0x00})
CreateWordField (TMP1, 0, F0SS)
CreateWordField (TMP1, 2, F0IV)
CreateDwordField (TMP1, 4, F0SF)
Store (0x0008, F0SS)
Store (0x0001, F0IV)
// For Muxless: Support only Fun1, Fun2, Fun5 and Fun6
Store (0x00000033, F0SF)
Return (TMP1)
}
//
// Function 1 (Get PowerXpress Parameters)
//
// This function retrieves various PowerXpress related platform parameters. It is assumed
// that LCD1 display output signals are always multiplexed.
// It is a required function if any display multiplexers are supported on a given platform.
//
// Arguments:
//
// Arg0: Function code
// Arg1: None
//
// Output:
//
// Structure data containing the following info:
//
// ===================================================================================================
// || Field || Format || Description ||
// ===================================================================================================
// || Structure Size || WORD || Structure size in bytes including the Structure Size field. ||
// ||-------------------||--------||----------------------------------------------------------------||
// || Valid Flags Mask || DWORD || Indicates which of the "Flags" bits are valid. ||
// ||-------------------||--------||----------------------------------------------------------------||
// || Flags || DWORD || Bit 0: LVDS I2C is accessible to both graphics controllers. ||
// || || || Bit 1: CRT1 I2C is accessible to both graphics controllers. ||
// || || || Bit 2: DVI1 I2C is accessible to both graphics controllers. ||
// || || || Bit 3: CRT1 RGB signals are multiplexed. ||
// || || || Bit 4: TV1 signals are multiplexed. ||
// || || || Bit 5: DFP1 signals are multiplexed. ||
// || || || Bit 6: Indicates that a separate multiplexer control ||
// || || || for I2C/Aux/HPD exists and is controlled by ||
// || || || function 4 (Monitor I2C Control). ||
// || || || Bit 7: Indicates that a "dynamic" PX scheme is supported. ||
// || || || Bit 8: Indicates that Dual Graphics (Asymmetric CrossFire) ||
// || || || is not supported, if set to one. ||
// || || || Bit 9: Indicates that fixed scheme is not supported, ||
// || || || if set to one. ||
// || || || Bit 10: Indicates that full dGPU power off in "dynamic" scheme ||
// || || || is supported, if set to one. ||
// || || || Bit 11: Indicates that discrete graphics must be powered on ||
// || || || while a monitor is connected to discrete graphics ||
// || || || connector, if set to one. ||
// || || || Bits 31-12: Reserved (must be zero). ||
// ===================================================================================================
//
If (LEqual (Arg0, PX_GET_POWERXPRESS_PARAMETERS))
{
Name (TMP2, Buffer(256) {0x00})
CreateWordField (TMP2, 0, F1SS)
CreateDwordField (TMP2, 2, F1VM)
CreateDwordField (TMP2, 6, F1FG)
Store (0x000A, F1SS) // Structure size of return package
// Bit 10 = 1 :dGPU power off
// Bit 14 = 1 : Windows Blue "Hybrid Graphics"is supported
Store (0x00004400, F1VM) // Mask used for valid bit fields
Store (0x00004400, F1FG) // Actual PX parameters field
Return (TMP2)
}
//
// Function 2 (Power Control)
//
// This function powers on/off the discrete graphics.
// It is a required function.
//
// Arguments:
//
// Arg0: Function code
// Arg1: Structure data containing the following info:
//
// ===================================================================================================
// || Field || Format || Description ||
// ===================================================================================================
// || Structure Size || WORD || Structure size in bytes including the Structure Size field. ||
// ||-------------------||--------||----------------------------------------------------------------||
// || Power State || BYTE || Indicates which of the "Flags" bits are valid. ||
// ||-------------------||--------||----------------------------------------------------------------||
// || Flags || DWORD || Bit 0: ||
// || || || 0 - Power off discrete graphics. ||
// || || || 1 - Power on discrete graphics. ||
// || || || Bits 7-1: Reserved (must be zero). ||
// ===================================================================================================
//
// Output:
//
// None.
//
If (LEqual (Arg0, PX_POWER_CONTROL))
{
CreateWordField (Arg1, 0, FN2S)
CreateByteField (Arg1, 2, DGPR)
If (LOr (LEqual (SGGP, 0x01), LEqual (SGGP, 0x02)))
{
If (LEqual (DGPR, Zero)) // Powers off discrete graphics
{
DGPU_SCOPE._OFF ()
}
If (LEqual (DGPR, One)) // Powers on discrete graphics
{
DGPU_SCOPE._ON ()
}
}
Return (Zero)
}
//
// Function 3 (Display Multiplexer Control)
//
// This function controls display multiplexers.
// It is a required function only, if display output multiplexers are supported on
// a given platform. This function must not be exposed by System BIOS on platforms
// where display output multiplexers are not supported.
//
// Arguments:
//
// Arg0: Function code
// Arg1: Structure data containing the following info:
//
// ===================================================================================================
// || Field || Format || Description ||
// ===================================================================================================
// || Structure Size || WORD || Structure size in bytes including the Structure Size field. ||
// ||-------------------||--------||----------------------------------------------------------------||
// || Display || WORD || Bit 0: ||
// || Multiplexer || || 0 - Switch display multiplexers to integrated graphics. ||
// || Control || || 1 - Switch display multiplexers to discrete graphics. ||
// || || || Bits 15-1: Reserved (must be zero). ||
// ===================================================================================================
//
// Output:
//
// None.
//
If (LEqual (Arg0, PX_DISPLAY_MULTIPLEXER_CONTROL))
{
CreateWordField (Arg1, 0, FN3S)
CreateWordField (Arg1, 2, SDMG)
If (LEqual (SDMG, Zero))
{
// DGPU_SCOPE.SGPO (DGPU_SCOPE.DSEL, Zero)
}
If (LEqual (SDMG, One))
{
// DGPU_SCOPE.SGPO (DGPU_SCOPE.DSEL, One)
}
Return (Zero)
}
//
// Function 4 (Monitor I2C Control)
//
// This function controls monitor I2C/Aux and HPD (Hot Plug Detect) lines.
// It is optional and does not need to be supported, if no monitor I2C/Aux/HPD
// lines need to be switched between two graphics devices.
// It is a required function only, if display output multiplexers are supported on a given platform.
//
// Arguments:
//
// Arg0: Function code
// Arg1: Structure data containing the following info:
//
// ===================================================================================================
// || Field || Format || Description ||
// ===================================================================================================
// || Structure Size || WORD || Structure size in bytes including the Structure Size field. ||
// ||-------------------||--------||----------------------------------------------------------------||
// || Monitor(s) I2C || WORD || Bit 0: ||
// || Control || || 0 - Switch I2C/Aux/HPD lines for all monitors ||
// || || || to integrated graphics. ||
// || || || 1 - Switch I2C/Aux/HPD lines for all monitors ||
// || || || to discrete graphics. ||
// || || || Bits 15-1: Reserved (must be zero). ||
// ===================================================================================================
//
// Output:
//
// None.
//
If (LEqual (Arg0, PX_MONITOR_I2C_CONTROL))
{
CreateWordField (Arg1, 0, FN4S)
CreateWordField (Arg1, 2, SIMG)
If (LEqual (SIMG, Zero))
{
// DGPU_SCOPE.SGPO (DGPU_SCOPE.ESEL, Zero)
}
If (LEqual (SIMG, One))
{
// DGPU_SCOPE.SGPO (DGPU_SCOPE.ESEL, One)
}
Return (Zero)
}
//
// Function 5 (Graphics Device Switch Start Notification)
//
// This function notifies System BIOS that graphics device switch process has been started.
// It is an optional function. It is only required if System BIOS needs to know
// which graphics device is active.
//
// Arguments:
//
// Arg0: Function code
// Arg1: Structure data containing the following info:
//
// ===================================================================================================
// || Field || Format || Description ||
// ===================================================================================================
// || Structure Size || WORD || Structure size in bytes including the Structure Size field. ||
// ||-------------------||--------||----------------------------------------------------------------||
// || Target Graphics || WORD || Bit 0: ||
// || Device || || 0 - Target graphics device is integrated graphics. ||
// || || || 1 - Target graphics device is discrete graphics. ||
// || || || Bits 15-1: Reserved (must be zero). ||
// ===================================================================================================
//
// Output:
//
// None.
//
If (LEqual (Arg0, PX_GFX_SWITCH_START_NOTIFICATION))
{
CreateWordField (Arg1, 0, FN5S)
CreateWordField (Arg1, 2, TGFX)
Store (TGFX, DGPU_SCOPE.TGXA)
Store (One, DGPU_SCOPE.GSTP)
Return (Zero)
}
//
// Function 6 (Graphics Device Switch End Notification)
//
// This function notifies System BIOS that graphics device switch process has been completed.
// It is an optional function. It is only required if System BIOS needs to know
// which graphics device is active.
//
// Arguments:
//
// Arg0: Function code
// Arg1: Structure data containing the following info:
//
// ===================================================================================================
// || Field || Format || Description ||
// ===================================================================================================
// || Structure Size || WORD || Structure size in bytes including the Structure Size field. ||
// ||-------------------||--------||----------------------------------------------------------------||
// || Active Graphics || WORD || Bit 0: ||
// || Device || || 0 - Active graphics device is integrated graphics. ||
// || || || 1 - Active graphics device is discrete graphics. ||
// || || || Bits 15-1: Reserved (must be zero). ||
// ===================================================================================================
//
// Output:
//
// None.
//
If (LEqual (Arg0, PX_GFX_SWITCH_END_NOTIFICATION))
{
CreateWordField (Arg1, 0, FN6S)
CreateWordField (Arg1, 2, AGFX)
Store (AGFX, DGPU_SCOPE.AGXA)
Store (Zero, DGPU_SCOPE.GSTP)
Return (Zero)
}
//
// Function 8 (Get Display Connectors Mapping)
//
// This function reports all display connectors on a given platform.Where display outputs from
// two ports on different adapters are multiplexed, two connector entries will be reported with
// the same ATIF ID and a different Adapter ID (ACPI ID can be the same or different). Where DP
// display outputs from two different ports on different adapters are multiplexed, two connector
// entries will be reported for integrated graphics adapter and two connector entries will be
// reported for discrete graphics adapter: one corresponds to the DP signal type and the other
// is for HDMI signal type. Where display outputs from a single port on an adapter are multiplexed
// then multiple connector entries will be reported with different ATIF IDs and the same Adapter ID
// (ACPI IDs will be different).
// It is a required function on platforms where a separate control for I2C/aux multiplexers is
// implemented and on platforms where external digital display I2C/aux signals and/or external
// digital display outputs are multiplexed.
//
// Arguments:
//
// Arg0: Function code
// Arg1: None
//
// Output:
//
// Structure data containing the following info:
//
// ===================================================================================================
// || Field || Format || Description ||
// ===================================================================================================
// || Num Connectors || WORD || Number of reported display connectors. ||
// ||-------------------||--------||----------------------------------------------------------------||
// || Connector || DWORD || Connector structure size in bytes excluding the Connector ||
// || Structure Size || || Structure Size field. ||
// ||-------------------||--------||----------------------------------------------------------------||
// || Flags || BYTE || Bit 0: display output supported by the graphics device ||
// || || || identified by Adapter ID. ||
// || || || Bit 1: display detectable through HPD by the graphics device ||
// || || || identified by Adapter ID. ||
// || || || Bit 2: display I2C/Aux lines available to the graphics device ||
// || || || identified by Adapter ID. ||
// || || || Bits 7-3: Reserved (must be zero). ||
// ||-------------------||--------||----------------------------------------------------------------||
// || ATIF ID || BYTE || Bit position in a global (per platform) ATIF display vector: ||
// || || || 0 = LCD1 5 = LCD2 10 = DFP4 ||
// || || || 1 = CRT1 6 = Reserved 11 = DFP5 ||
// || || || 2 = TV 7 = DFP2 12 = DFP6 ||
// || || || 3 = DFP1 8 = CV ||
// || || || 4 = CRT2 9 = DFP3 ||
// || || || ATIF display vector is defined as: ||
// || || || Bit 0: LCD1 Bit 7: DFP2 ||
// || || || Bit 1: CRT1 Bit 8: CV ||
// || || || Bit 2: TV Bit 9: DFP3 ||
// || || || Bit 3: DFP1 Bit 10: DFP4 ||
// || || || Bit 4: CRT2 Bit 11: DFP5 ||
// || || || Bit 5: LCD2 Bit 12: DFP6 ||
// || || || Bit 6: Reserved (must be zero) ||
// || || || Bits 15-13: Reserved (must be zero). ||
// ||-------------------||--------||----------------------------------------------------------------||
// || Adapter ID || BYTE || Adapter ID: 0 = integrated graphics device, ||
// || || || 1 = discrete graphics device on the lowest ||
// || || || numbered PCIe bus, increments per PCIe bus number. ||
// ||-------------------||--------||----------------------------------------------------------------||
// || ACPI ID || WORD || Connector ACPI ID (local, per adapter), ||
// || || || can be different for the same connector ||
// || || || where output is multiplexed between two adapters. ||
// ===================================================================================================
// ============================================================================================
// || Flags || ATIF ID (Global, || Adapter ID || ACPI ID (Local, ||
// || || per Platform) || || per Adapter) ||
// ============================================================================================
// || display output supported || LCD1 || 0 || 0x0400 ||
// || display I2C/Aux lines available || || || ||
// ||----------------------------------||-------------------||------------||-----------------||
// || display output supported || CRT1 || 0 || 0x0100 ||
// || display I2C/Aux lines available || || || ||
// ||----------------------------------||-------------------||------------||-----------------||
// || display output supported || DFP1 || 0 || 0x0300 ||
// || display I2C/Aux lines available || || || ||
// || display detectable through HPD || || || ||
// ||----------------------------------||-------------------||------------||-----------------||
// || display output supported || DFP2 || 0 || 0x0301 ||
// || display I2C/Aux lines available || || || ||
// || display detectable through HPD || || || ||
// ||----------------------------------||-------------------||------------||-----------------||
// || display I2C/Aux lines available || DFP3 || 0 || 0x0302 ||
// || display detectable through HPD || || || ||
// ||----------------------------------||-------------------||------------||-----------------||
// || display output supported || LCD1 || 1 || 0x0110 ||
// || display I2C/Aux lines available || || || ||
// ||----------------------------------||-------------------||------------||-----------------||
// || display output supported || CRT1 || 1 || 0x0100 ||
// || display I2C/Aux lines available || || || ||
// ||----------------------------------||-------------------||------------||-----------------||
// || display output supported || DFP1 || 1 || 0x0210 ||
// || display I2C/Aux lines available || || || ||
// || display detectable through HPD || || || ||
// ||----------------------------------||-------------------||------------||-----------------||
// || display output supported || DFP2 || 1 || 0x0210 ||
// || display I2C/Aux lines available || || || ||
// || display detectable through HPD || || || ||
// ||----------------------------------||-------------------||------------||-----------------||
// || display output supported || DFP3 || 1 || 0x0220 ||
// || display I2C/Aux lines available || || || ||
// || display detectable through HPD || || || ||
// ============================================================================================
//
// Note that _DOD method in "Discrete Only" boot-up mode will reflect these IDs.
// =================================================================
// || ACPI ID || Connector ||
// =================================================================
// || 0x00000100 || VGA #1 ||
// || 0x00000110 || LVDS or Embedded DP ||
// || 0x00000120 || VGA #2 ||
// || 0x000001F0 || Component ||
// || 0x00000200 || Composite or S Video ||
// || 0x00000210 || External digital connector #1 (DP, HDMI, DVI) ||
// || 0x00000220 || External digital connector #2 (DP, HDMI, DVI) ||
// || 0x00000230 || External digital connector #3 (DP, HDMI, DVI) ||
// || 0x00000240 || External digital connector #4 (DP, HDMI, DVI) ||
// || 0x00000250 || External digital connector #5 (DP, HDMI, DVI) ||
// || 0x00000260 || External digital connector #6 (DP, HDMI, DVI) ||
// =================================================================
//
// Note that _DOD method in Hybrid Graphics boot-up mode will reflect these IDs.
// =================================================================
// || ACPI ID || Connector ||
// =================================================================
// || 0x80000100 || VGA #1 ||
// || 0x80000400 || LVDS or Embedded DP ||
// || 0x80000101 || VGA #2 ||
// || 0x8000020F || Component ||
// || 0x80000200 || Composite or S Video ||
// || 0x80000300 || External digital connector #1 (DP, HDMI, DVI) ||
// || 0x80000301 || External digital connector #2 (DP, HDMI, DVI) ||
// || 0x80000302 || External digital connector #3 (DP, HDMI, DVI) ||
// || 0x80000303 || External digital connector #4 (DP, HDMI, DVI) ||
// || 0x80000304 || External digital connector #5 (DP, HDMI, DVI) ||
// || 0x80000306 || External digital connector #6 (DP, HDMI, DVI) ||
// =================================================================
//
If (LEqual (Arg0, PX_GET_DISPLAY_CONNECTORS_MAPPING))
{
Name (TMP3, Buffer(0x0100) {0x0E, 0x00, 0x46, 0x00,
0x07, 0x01, 0x00, 0x00, 0x01,
0x07, 0x01, 0x01, 0x00, 0x01,
0x05, 0x00, 0x00, 0x00, 0x04,
0x05, 0x00, 0x01, 0x10, 0x01,
0x07, 0x03, 0x00, 0x00, 0x03,
0x07, 0x03, 0x01, 0x10, 0x02,
0x07, 0x07, 0x00, 0x01, 0x03,
0x07, 0x07, 0x01, 0x10, 0x02,
0x07, 0x09, 0x00, 0x02, 0x03,
0x07, 0x09, 0x01, 0x20, 0x02,
0x07, 0x0A, 0x00, 0x03, 0x03,
0x07, 0x0A, 0x01, 0x30, 0x02,
0x07, 0x0B, 0x00, 0x04, 0x03,
0x07, 0x0B, 0x01, 0x30, 0x02,
0x07, 0x0C, 0x00, 0x06, 0x03})
Name (SGFL, One)
Name (MXD1, SG_MUX_DID_1)
Name (MXD2, SG_MUX_DID_2)
Name (MXD3, SG_MUX_DID_3)
Name (MXD4, SG_MUX_DID_4)
Name (MXD5, SG_MUX_DID_5)
Name (MXD6, SG_MUX_DID_6)
Name (MXD7, SG_MUX_DID_7)
Name (MXD8, SG_MUX_DID_8)
Name (MXD9, SG_MUX_DID_9)
CreateWordField (TMP3, 0, ATNO)
CreateWordField (TMP3, 2, ATSZ)
// Store (ADPM (MXD2, 1), Index (TMP3, 14))
// Store (ADPM (MXD2, 1), Index (TMP3, 19))
// Store (ADPM (MXD3, 1), Index (TMP3, 24))
// Store (ADPM (MXD3, 2), Index (TMP3, 29))
// Store (ADPM (MXD4, 1), Index (TMP3, 34))
// Store (ADPM (MXD4, 2), Index (TMP3, 39))
// Store (ADPM (MXD5, 1), Index (TMP3, 44))
// Store (ADPM (MXD5, 2), Index (TMP3, 49))
// Store (ADPM (MXD6, 1), Index (TMP3, 54))
// Store (ADPM (MXD6, 2), Index (TMP3, 59))
// Store (ADPM (MXD7, 1), Index (TMP3, 64))
// Store (ADPM (MXD7, 2), Index (TMP3, 69))
If (And (SGFL, One))
{
Store (Add (ATNO, One), ATNO)
Store (Add (ATSZ, 0x05), ATSZ)
}
Return (TMP3)
}
Return (Zero) //End of ATPX
}
Method (ADPM, 2, Serialized)
{
Store (Zero, Local1)
ShiftRight (Arg0, 0x10, Local0)
If (LEqual (Arg1, One))
{
Or (And (Local0, One), Local1, Local1)
}
Else
{
Or (ShiftRight (And (Local0, 0x02), One), Local1, Local1)
}
ShiftLeft (Local1, One, Local1)
ShiftRight (Arg0, 0x18, Local0)
If (LEqual (Arg1, One))
{
Or (And (Local0, One), Local1, Local1)
}
Else
{
Or (ShiftRight (And (Local0, 0x02), One), Local1, Local1)
}
ShiftLeft (Local1, One, Local1)
ShiftRight (Arg0, 0x08, Local0)
If (LEqual (Arg1, One))
{
Or (And (Local0, One), Local1, Local1)
}
Else
{
Or (ShiftRight (And (Local0, 0x02), One), Local1, Local1)
}
Return (Local1)
}
//
// ATI PowerXpress (PX) get ROM Method: ATRM
//
// This is PowerXpress specific Control Method used by the discrete graphics driver on
// PowerXpress enabled platforms to get a runtime modified copy of the discrete graphics
// device ROM data (Video BIOS). The ATRM method definition is identical to the standard
// ACPI _ROM method except that the ATRM method is defined in the _VGA namespace of the
// integrated graphics device.
//
// This function is required unless another method of exposing non-POSTed Video BIOS
// image to the driver is supported by System BIOS: copying Video BIOS image to Video
// Memory after Video BIOS obtained run-time parameters from System BIOS or when there
// are no run-time parameters (Video BIOS image has hard-coded platform dependent data)
// and Video BIOS ROM image can be accessed directly by the driver.
//
// Arguments:
//
// Arg0: Offset of the graphics device ROM data.
// Arg1: Size of the buffer to fill in (up to 4K).
//
// Output:
//
// Buffer of bytes.
//
Method (ATRM, 2, Serialized)
{
Store (Arg0, Local0)
Store (Arg1, Local1)
Name (VROM, Buffer(Local1) {0x00}) // Create 4K buffer to return to DD
If (LGreater (Local1, 0x1000))
{
Store (0x1000, Local1) // Return dummy buffer if asking for more than 4K
}
If (LGreater (Arg0, DGPU_SCOPE.RVBS))
{
Return (VROM) // Return dummy buffer if asking beyond VBIOS image
}
Add (Arg0, Arg1, Local2)
If (LGreater (Local2, DGPU_SCOPE.RVBS)) // If requested BASE+LEN > VBIOS image size
{
Subtract (DGPU_SCOPE.RVBS, Local0, Local1) // Limit length to the final chunk of VBIOS image
}
Divide (Local0, 0x8000, Local3, Local4) // (Dividend, Divisor, Remainder, Result)
Switch (Local4)
{
Case (0)
{
Store (DGPU_SCOPE.VBS1, Local5)
}
Case (1)
{
Store (DGPU_SCOPE.VBS2, Local5)
}
Case (2)
{
Store (DGPU_SCOPE.VBS3, Local5)
}
Case (3)
{
Store (DGPU_SCOPE.VBS4, Local5)
}
Case (4)
{
Store (DGPU_SCOPE.VBS5, Local5)
}
Case (5)
{
Store (DGPU_SCOPE.VBS6, Local5)
}
Case (6)
{
Store (DGPU_SCOPE.VBS7, Local5)
}
Case (7)
{
Store (DGPU_SCOPE.VBS8, Local5)
}
}
Multiply (0x8000, Local4, Local4) // (Multiplicand, Multiplier, Result)
Subtract (Local0, Local4, Local0)
Mid (Local5, Local0, Local1, VROM)
Return (VROM)
}
}
Reference in New Issue View Git Blame Copy Permalink