111 lines
5.3 KiB
C
111 lines
5.3 KiB
C
/** @file
|
|
Rst policy
|
|
|
|
@copyright
|
|
INTEL CONFIDENTIAL
|
|
Copyright 2018 Intel Corporation.
|
|
|
|
The source code contained or described herein and all documents related to the
|
|
source code ("Material") are owned by Intel Corporation or its suppliers or
|
|
licensors. Title to the Material remains with Intel Corporation or its suppliers
|
|
and licensors. The Material may contain trade secrets and proprietary and
|
|
confidential information of Intel Corporation and its suppliers and licensors,
|
|
and is protected by worldwide copyright and trade secret laws and treaty
|
|
provisions. No part of the Material may be used, copied, reproduced, modified,
|
|
published, uploaded, posted, transmitted, distributed, or disclosed in any way
|
|
without Intel's prior express written permission.
|
|
|
|
No license under any patent, copyright, trade secret or other intellectual
|
|
property right is granted to or conferred upon you by disclosure or delivery
|
|
of the Materials, either expressly, by implication, inducement, estoppel or
|
|
otherwise. Any license under such intellectual property rights must be
|
|
express and approved by Intel in writing.
|
|
|
|
Unless otherwise agreed by Intel in writing, you may not remove or alter
|
|
this notice or any other notice embedded in Materials by Intel or
|
|
Intel's suppliers or licensors in any way.
|
|
|
|
This file contains an 'Intel Peripheral Driver' and is uniquely identified as
|
|
"Intel Reference Module" and is licensed for Intel CPUs and chipsets under
|
|
the terms of your license agreement with Intel or your vendor. This file may
|
|
be modified by the user, subject to additional terms of the license agreement.
|
|
|
|
@par Specification Reference:
|
|
**/
|
|
#ifndef _RST_CONFIG_H_
|
|
#define _RST_CONFIG_H_
|
|
#include <PchLimits.h>
|
|
#include <ConfigBlock.h>
|
|
|
|
#define RST_CONFIG_REVISION 1
|
|
extern EFI_GUID gRstConfigGuid;
|
|
|
|
#pragma pack (push,1)
|
|
|
|
typedef enum {
|
|
SataOromDelay2sec,
|
|
SataOromDelay4sec,
|
|
SataOromDelay6sec,
|
|
SataOromDelay8sec
|
|
} SATA_OROM_DELAY;
|
|
|
|
/**
|
|
This structure describes the details of Intel RST for PCIe Storage remapping
|
|
Note: In order to use this feature, Intel RST Driver is required
|
|
**/
|
|
typedef struct {
|
|
/**
|
|
This member describes whether or not the Intel RST for PCIe Storage remapping should be enabled. <b>0: Disable</b>; 1: Enable.
|
|
Note 1: If Sata Controller is disabled, PCIe Storage Remapping should be disabled as well
|
|
Note 2: If PCIe Storage remapping is enabled, the PCH integrated AHCI controllers Class Code is configured as RAID
|
|
**/
|
|
UINT32 Enable : 1;
|
|
/**
|
|
Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, <b>0 = autodetect</b>)
|
|
The supported ports for PCIe Storage remapping is different depend on the platform and cycle router
|
|
**/
|
|
UINT32 RstPcieStoragePort : 5;
|
|
/**
|
|
PCIe Storage Device Reset Delay in milliseconds (ms), which it guarantees such delay gap is fulfilled
|
|
before PCIe Storage Device configuration space is accessed after an reset caused by the link disable and enable step.
|
|
Default value is <b>100ms</b>.
|
|
**/
|
|
UINT32 DeviceResetDelay : 8;
|
|
UINT32 RsvdBits0 : 18; ///< Reserved bits
|
|
|
|
} RST_HARDWARE_REMAPPED_STORAGE_CONFIG;
|
|
|
|
/**
|
|
Rapid Storage Technology settings.
|
|
|
|
<b>Revision 1</b>:
|
|
- Initial version.
|
|
**/
|
|
typedef struct {
|
|
CONFIG_BLOCK_HEADER Header; ///< Config Block Header
|
|
|
|
UINT32 Raid0 : 1; ///< 0 : Disable; <b>1 : Enable</b> RAID0
|
|
UINT32 Raid1 : 1; ///< 0 : Disable; <b>1 : Enable</b> RAID1
|
|
UINT32 Raid10 : 1; ///< 0 : Disable; <b>1 : Enable</b> RAID10
|
|
UINT32 Raid5 : 1; ///< 0 : Disable; <b>1 : Enable</b> RAID5
|
|
UINT32 Irrt : 1; ///< 0 : Disable; <b>1 : Enable</b> Intel Rapid Recovery Technology
|
|
UINT32 OromUiBanner : 1; ///< 0 : Disable; <b>1 : Enable</b> OROM UI and BANNER
|
|
UINT32 OromUiDelay : 2; ///< <b>00b : 2 secs</b>; 01b : 4 secs; 10b : 6 secs; 11 : 8 secs (see : SATA_OROM_DELAY)
|
|
UINT32 HddUnlock : 1; ///< 0 : Disable; <b>1 : Enable</b>. Indicates that the HDD password unlock in the OS is enabled
|
|
UINT32 LedLocate : 1; ///< 0 : Disable; <b>1 : Enable</b>. Indicates that the LED/SGPIO hardware is attached and ping to locate feature is enabled on the OS
|
|
UINT32 IrrtOnly : 1; ///< 0 : Disable; <b>1 : Enable</b>. Allow only IRRT drives to span internal and external ports
|
|
UINT32 SmartStorage : 1; ///< 0 : Disable; <b>1 : Enable</b> RST Smart Storage caching Bit
|
|
UINT32 LegacyOrom : 1; ///< <b>0 : Disable</b>; 1 : Enable RST Legacy OROM
|
|
UINT32 OptaneMemory : 1; ///< 0: Disable; <b>1: Enable</b> RST Optane(TM) Memory
|
|
UINT32 CpuAttachedStorage : 1; ///< 0: Disable; <b>1: Enable</b> CPU Attached Storage
|
|
UINT32 RsvdBits0 : 17; ///< Reserved Bits
|
|
/**
|
|
This member describes the details of implementation of Intel RST for PCIe Storage remapping (Intel RST Driver is required)
|
|
Note: RST for PCIe Sorage remapping is supported only for first SATA controller if more controllers are available
|
|
**/
|
|
RST_HARDWARE_REMAPPED_STORAGE_CONFIG HardwareRemappedStorageConfig[PCH_MAX_RST_PCIE_STORAGE_CR];
|
|
} RST_CONFIG;
|
|
|
|
#pragma pack (pop)
|
|
#endif
|