alder_lake_bios/Insyde/InsydeModulePkg/Include/Ppi/Legacy8259.h

267 lines
9.0 KiB
C

/** @file
This file defines the Legacy 8259 PPI.
;******************************************************************************
;* Copyright (c) 2015, Insyde Software Corp. All Rights Reserved.
;*
;* You may not reproduce, distribute, publish, display, perform, modify, adapt,
;* transmit, broadcast, present, recite, release, license or otherwise exploit
;* any part of this publication in any form, by any means, without the prior
;* written permission of Insyde Software Corporation.
;*
;******************************************************************************
*/
#ifndef _H2O_LEGACY_8259_PPI_H_
#define _H2O_LEGACY_8259_PPI_H_
#include <Protocol/Legacy8259.h>
#define H2O_LEGACY_8259_PPI_GUID \
{ \
0x77f01dc5, 0x3bea, 0x49fd, { 0x8a, 0x5e, 0xe7, 0x37, 0xa4, 0xda, 0x1a, 0x8d } \
}
typedef struct _H2O_LEGACY_8259_PPI H2O_LEGACY_8259_PPI;
/**
Get the 8259 interrupt masks for Irq0 - Irq15. A different mask exists for
the legacy mode mask and the protected mode mask. The base address for the 8259
is different for legacy and protected mode, so two masks are required.
@param[in] This The PPI instance pointer.
@param[in] MasterBase The base vector for the Master PIC in the 8259 controller.
@param[in] SlaveBase The base vector for the Slave PIC in the 8259 controller.
@retval EFI_SUCCESS The new bases were programmed.
@retval EFI_DEVICE_ERROR A device error occured programming the vector bases.
**/
typedef
EFI_STATUS
(EFIAPI *H2O_LEGACY_8259_SET_VECTOR_BASE)(
IN H2O_LEGACY_8259_PPI *This,
IN UINT8 MasterBase,
IN UINT8 SlaveBase
);
/**
Get the 8259 interrupt masks for Irq0 - Irq15. A different mask exists for
the legacy mode mask and the protected mode mask. The base address for the 8259
is different for legacy and protected mode, so two masks are required.
@param[in] This The PPI instance pointer.
@param[out] LegacyMask Bit 0 is Irq0 - Bit 15 is Irq15.
@param[out] LegacyEdgeLevel Bit 0 is Irq0 - Bit 15 is Irq15.
@param[out] ProtectedMask Bit 0 is Irq0 - Bit 15 is Irq15.
@param[out] ProtectedEdgeLevel Bit 0 is Irq0 - Bit 15 is Irq15.
@retval EFI_SUCCESS 8259 status returned.
@retval EFI_DEVICE_ERROR Error reading 8259.
**/
typedef
EFI_STATUS
(EFIAPI *H2O_LEGACY_8259_GET_MASK)(
IN H2O_LEGACY_8259_PPI *This,
OUT UINT16 *LegacyMask OPTIONAL,
OUT UINT16 *LegacyEdgeLevel OPTIONAL,
OUT UINT16 *ProtectedMask OPTIONAL,
OUT UINT16 *ProtectedEdgeLevel OPTIONAL
);
/**
Set the 8259 interrupt masks for Irq0 - Irq15. A different mask exists for
the legacy mode mask and the protected mode mask. The base address for the 8259
is different for legacy and protected mode, so two masks are required.
Also set the edge/level masks.
@param[in] This The PPI instance pointer.
@param[in] LegacyMask Bit 0 is Irq0 - Bit 15 is Irq15.
@param[in] LegacyEdgeLevel Bit 0 is Irq0 - Bit 15 is Irq15.
@param[in] ProtectedMask Bit 0 is Irq0 - Bit 15 is Irq15.
@param[in] ProtectedEdgeLevel Bit 0 is Irq0 - Bit 15 is Irq15.
@retval EFI_SUCCESS 8259 status returned.
@retval EFI_DEVICE_ERROR Error writing 8259.
**/
typedef
EFI_STATUS
(EFIAPI *H2O_LEGACY_8259_SET_MASK)(
IN H2O_LEGACY_8259_PPI *This,
IN UINT16 *LegacyMask OPTIONAL,
IN UINT16 *LegacyEdgeLevel OPTIONAL,
IN UINT16 *ProtectedMask OPTIONAL,
IN UINT16 *ProtectedEdgeLevel OPTIONAL
);
/**
Set the 8259 mode of operation. The base address for the 8259 is different for
legacy and protected mode. The legacy mode requires the master 8259 to have a
master base of 0x08 and the slave base of 0x70. The protected mode base locations
are not defined. Interrupts must be masked by the caller before this function
is called. The interrupt mask from the current mode is saved. The interrupt
mask for the new mode is Mask, or if Mask does not exist the previously saved
mask is used.
@param[in] This The PPI instance pointer.
@param[in] Mode The mode of operation. i.e. the real mode or protected mode.
@param[in] Mask Optional interupt mask for the new mode.
@param[in] EdgeLevel Optional trigger mask for the new mode.
@retval EFI_SUCCESS 8259 programmed.
@retval EFI_DEVICE_ERROR Error writing to 8259.
**/
typedef
EFI_STATUS
(EFIAPI *H2O_LEGACY_8259_SET_MODE)(
IN H2O_LEGACY_8259_PPI *This,
IN EFI_8259_MODE Mode,
IN UINT16 *Mask OPTIONAL,
IN UINT16 *EdgeLevel OPTIONAL
);
/**
Convert from IRQ to processor interrupt vector number.
@param[in] This The PPI instance pointer.
@param[in] Irq 8259 IRQ0 - IRQ15.
@param[out] Vector The processor vector number that matches an Irq.
@retval EFI_SUCCESS The Vector matching Irq is returned.
@retval EFI_INVALID_PARAMETER The Irq not valid.
**/
typedef
EFI_STATUS
(EFIAPI *H2O_LEGACY_8259_GET_VECTOR)(
IN H2O_LEGACY_8259_PPI *This,
IN EFI_8259_IRQ Irq,
OUT UINT8 *Vector
);
/**
Enable Irq by unmasking interrupt in 8259
@param[in] This The PPI instance pointer.
@param[in] Irq 8259 IRQ0 - IRQ15.
@param[in] LevelTriggered TRUE if level triggered. FALSE if edge triggered.
@retval EFI_SUCCESS The Irq was enabled on 8259.
@retval EFI_INVALID_PARAMETER The Irq is not valid.
**/
typedef
EFI_STATUS
(EFIAPI *H2O_LEGACY_8259_ENABLE_IRQ)(
IN H2O_LEGACY_8259_PPI *This,
IN EFI_8259_IRQ Irq,
IN BOOLEAN LevelTriggered
);
/**
Disable Irq by masking interrupt in 8259
@param[in] This The PPI instance pointer.
@param[in] Irq 8259 IRQ0 - IRQ15.
@retval EFI_SUCCESS The Irq was disabled on 8259.
@retval EFI_INVALID_PARAMETER The Irq is not valid.
**/
typedef
EFI_STATUS
(EFIAPI *H2O_LEGACY_8259_DISABLE_IRQ)(
IN H2O_LEGACY_8259_PPI *This,
IN EFI_8259_IRQ Irq
);
/**
PciHandle represents a PCI config space of a PCI function. Vector
represents Interrupt Pin (from PCI config space) and it is the data
that is programmed into the Interrupt Line (from the PCI config space)
register.
@param[in] This The PPI instance pointer.
@param[in] PciHandle The PCI function to return the vector for.
@param[out] Vector The vector for the function it matches.
@retval EFI_SUCCESS A valid Vector was returned.
@retval EFI_INVALID_PARAMETER PciHandle not valid.
**/
typedef
EFI_STATUS
(EFIAPI *H2O_LEGACY_8259_GET_INTERRUPT_LINE)(
IN H2O_LEGACY_8259_PPI *This,
IN EFI_HANDLE PciHandle,
OUT UINT8 *Vector
);
/**
Send an EOI to 8259
@param[in] This The PPI instance pointer.
@param[in] Irq 8259 IRQ0 - IRQ15.
@retval EFI_SUCCESS EOI was successfully sent to 8259.
@retval EFI_INVALID_PARAMETER The Irq isnot valid.
**/
typedef
EFI_STATUS
(EFIAPI *H2O_LEGACY_8259_END_OF_INTERRUPT)(
IN H2O_LEGACY_8259_PPI *This,
IN EFI_8259_IRQ Irq
);
/**
@par PPI Description:
Abstracts the 8259 and APIC hardware control between EFI usage and
Compatibility16 usage.
@param SetVectorBase
Sets the vector bases for master and slave PICs.
@param GetMask
Gets IRQ and edge/level masks for 16-bit real mode and 32-bit protected mode.
@param SetMask
Sets the IRQ and edge\level masks for 16-bit real mode and 32-bit protected mode.
@param SetMode
Sets PIC mode to 16-bit real mode or 32-bit protected mode.
@param GetVector
Gets the base vector assigned to an IRQ.
@param EnableIrq
Enables an IRQ.
@param DisableIrq
Disables an IRQ.
@param GetInterruptLine
Gets an IRQ that is assigned to a PCI device.
@param EndOfInterrupt
Issues the end of interrupt command.
**/
struct _H2O_LEGACY_8259_PPI {
H2O_LEGACY_8259_SET_VECTOR_BASE SetVectorBase;
H2O_LEGACY_8259_GET_MASK GetMask;
H2O_LEGACY_8259_SET_MASK SetMask;
H2O_LEGACY_8259_SET_MODE SetMode;
H2O_LEGACY_8259_GET_VECTOR GetVector;
H2O_LEGACY_8259_ENABLE_IRQ EnableIrq;
H2O_LEGACY_8259_DISABLE_IRQ DisableIrq;
H2O_LEGACY_8259_GET_INTERRUPT_LINE GetInterruptLine;
H2O_LEGACY_8259_END_OF_INTERRUPT EndOfInterrupt;
};
extern EFI_GUID gH2OLegacy8259PpiGuid;
#endif