222 lines
14 KiB
Plaintext
222 lines
14 KiB
Plaintext
/**@file
|
|
|
|
@copyright
|
|
INTEL CONFIDENTIAL
|
|
Copyright 2009 - 2021 Intel Corporation.
|
|
|
|
The source code contained or described herein and all documents related to the
|
|
source code ("Material") are owned by Intel Corporation or its suppliers or
|
|
licensors. Title to the Material remains with Intel Corporation or its suppliers
|
|
and licensors. The Material may contain trade secrets and proprietary and
|
|
confidential information of Intel Corporation and its suppliers and licensors,
|
|
and is protected by worldwide copyright and trade secret laws and treaty
|
|
provisions. No part of the Material may be used, copied, reproduced, modified,
|
|
published, uploaded, posted, transmitted, distributed, or disclosed in any way
|
|
without Intel's prior express written permission.
|
|
|
|
No license under any patent, copyright, trade secret or other intellectual
|
|
property right is granted to or conferred upon you by disclosure or delivery
|
|
of the Materials, either expressly, by implication, inducement, estoppel or
|
|
otherwise. Any license under such intellectual property rights must be
|
|
express and approved by Intel in writing.
|
|
|
|
Unless otherwise agreed by Intel in writing, you may not remove or alter
|
|
this notice or any other notice embedded in Materials by Intel or
|
|
Intel's suppliers or licensors in any way.
|
|
|
|
This file contains a 'Sample Driver' and is licensed as such under the terms
|
|
of your license agreement with Intel or your vendor. This file may be modified
|
|
by the user, subject to the additional terms of the license agreement.
|
|
|
|
@par Specification
|
|
**/
|
|
|
|
//
|
|
//Module Name:
|
|
//
|
|
// IccSetup.uni
|
|
//
|
|
//Abstract:
|
|
//
|
|
// Strings for Icc advanced menu.
|
|
//
|
|
//--*/
|
|
/=#
|
|
#include "VFR.uni"
|
|
|
|
|
|
#string STR_BCLK_FORM #language en-US "BCLK Configuration"
|
|
|
|
#string STR_BCLK_SOURCE #language en-US "BCLK Source Config"
|
|
#string STR_BCLK_SOURCE_HELP #language en-US "CPU BCLK is only BCLK Source for ADL."
|
|
#string STR_BCLK_SOURCE_VALUE #language en-US "CPU BCLK"
|
|
#string STR_PCH_BCLK_SOURCE #language en-US "PCH BCLK"
|
|
|
|
//
|
|
// WDT
|
|
//
|
|
#string STR_OC_WDT_ENABLE #language en-US "OC Watchdog Timer"
|
|
#string STR_OC_WDT_ENABLE_HELP #language en-US "When enabled, the OC watchdog timer is exposed to OS as an ACPI device. WDT HW is always used by BIOS when clock settings are changed."
|
|
|
|
//
|
|
// ICC Profile
|
|
//
|
|
#string STR_ICC_PROFILE #language en-US "ICC Profile"
|
|
#string STR_ICC_PROFILE_HELP #language en-US "Select clock profile that corresponds to the platform configuration. Profiles are defined by the OEM and platform capabilites. Tpically, profile 0 has failsafe settings. Other profiles correspond to WiMax, 3G, or Overclocking settings."
|
|
|
|
//
|
|
// ICC Clocking Library
|
|
//
|
|
#string STR_BCLK_FORM_HELP #language en-US "BCLK Configuration options"
|
|
#string STR_ICC_LIB_VERSION #language en-US "ICC Clocking Library"
|
|
#string STR_ICC_LIB_VERSION_NR #language en-US "N/A"
|
|
|
|
//
|
|
// CPU BCLK Clock Settings
|
|
//
|
|
#string STR_CPU_BCLK_TITLE #language en-US "CPU - BCLK Clock Settings"
|
|
#string STR_CPU_BCLK_RFI_FREQUENCY_LOW #language en-US "BCLK RFI Frequency - SAGV Low"
|
|
#string STR_CPU_BCLK_RFI_FREQUENCY_MID #language en-US "BCLK RFI Frequency - SAGV Mid"
|
|
#string STR_CPU_BCLK_RFI_FREQUENCY_HIGH #language en-US "BCLK RFI Frequency - SAGV High"
|
|
#string STR_CPU_BCLK_RFI_FREQUENCY_MAX #language en-US "BCLK RFI Frequency - SAGV Max"
|
|
#string STR_CPU_BCLK_RFI_FREQUENCY_HELP #language en-US "BCLK RFI Frequency in 10kHz increments. Specifies new CPU BCLK RFI frequency for the specified SAGV point. Allowed range is 0 and 98-100Mhz. 0 = No RFI frequency applied. Example: For 98.75MHz, enter 9875."
|
|
#string STR_CPU_BCLK_SPREAD #language en-US "BCLK Spread"
|
|
#string STR_CPU_BCLK_SPREAD_HELP #language en-US "BCLK Spread Enable or Disable. When enabled, BCLK frequency will run at a fixed spread percentage. Spread percentage is not configurable."
|
|
|
|
//
|
|
// PCH BCLK Clock Settings
|
|
//
|
|
#string STR_ICC_CLOCK_NUMBER #language en-US "placeholder for clock number"
|
|
#string STR_ICC_CLOCK1_TITLE #language en-US "CSME - BCLK Clock Settings"
|
|
#string STR_ICC_CLOCK_DEFAULT_SETTINGS #language en-US " Default Clock Settings"
|
|
#string STR_ICC_CLOCK1_DEFAULT_TEXT #language en-US "100.00MHz 0.50% Downspread"
|
|
|
|
#string STR_ICC_CLOCK_FREQ_RANGE #language en-US " Frequency Range Limits"
|
|
#string STR_ICC_CLOCK1_FREQ_RANGE_TEXT #language en-US "uninitialized MHz"
|
|
|
|
#string STR_ICC_CLOCK_MAX_SPREAD #language en-US " Maximum Spread %"
|
|
#string STR_ICC_CLOCK1_MAX_SPREAD_TEXT #language en-US "uninitialized %"
|
|
|
|
#string STR_ICC_CLOCK_SPREAD_ADJUSTMENTS #language en-US " Spread Mode Adjustments"
|
|
#string STR_ICC_CLOCK1_SPREAD_ADJUSTMENTS_TEXT #language en-US "Uninitialized"
|
|
|
|
#string STR_ICC_CLOCK_FREQUENCY #language en-US " Clock Frequency"
|
|
#string STR_ICC_CLOCK_FREQUENCY_HELP #language en-US "Frequency in 10kHz increments. Specifies new BCLK frequency to be applied. Frequency is rounded to nearest valid value. Allowed range is limited by the Max/Min supported frequencies. Changes are not applied until settings are saved and platform resets. Example: For 125.70MHz, enter 12570."
|
|
|
|
#string STR_ICC_CLOCK_SPREAD_PERCENT1 #language en-US " Spread %"
|
|
#string STR_ICC_CLOCK_SPREAD_PERCENT2 #language en-US " Spread %"
|
|
#string STR_ICC_CLOCK_SPREAD_PERCENT_HELP #language en-US "Specifies the amount of spread spectrum clocking to be applied to the base clock frequency in 0.01% increments. Allowed range is limited by Maximum Spread % and supported Spread mode Adjustements. If Changes Allowed, a value between 0 and Max Spread % can be specified. Value is adjusted to settings supported by HW. If only Halt Allowed, only 0% and default spread % can be specified. Changes are not applied until settings are saved and platform resets."
|
|
|
|
#string STR_ICC_CLOCK_SPREAD_MODE1 #language en-US " Spread Mode"
|
|
#string STR_ICC_CLOCK_SPREAD_MODE2 #language en-US " Spread Mode"
|
|
#string STR_ICC_CLOCK_SPREAD_MODE_HELP #language en-US "Determines method of clock spectrum distribution applied to the base frequency. Changes are not appied until settings are saved and platform resets."
|
|
|
|
#string STR_ICC_BCLK_CHANGE_WARMRESET #language en-US " Bclk Change Permanent"
|
|
#string STR_ICC_BCLK_CHANGE_WARMRESET_HELP #language en-US "Changes how the BCLK frequency changes are applied permanent with warm reset. 0 - Disabled. 1 - Enabled."
|
|
|
|
#string STR_ICC_BCLK_CHANGE_CONTINUES #language en-US " Bclk Change w/o Reset"
|
|
#string STR_ICC_BCLK_CHANGE_CONTINUES_HELP #language en-US "Changes how the BCLK frequency changes are applied. 0 - Realtime. 1 - Permanent, without warm reset. NOTE: Realtime changes will be applied when 'F4' hotkey is pressed. Uses MEI SET_CLOCK_SETTINGS command 0x1B."
|
|
|
|
#string STR_BCLK_CHANGE_PERM_WITH_RESET #language en-US "Permanent, with warm reset"
|
|
#string STR_BCLK_CHANGE_PERM_NO_RESET #language en-US "Permanent, no warm reset"
|
|
#string STR_BCLK_CHANGE_REAL_TIME #language en-US "Real Time change"
|
|
|
|
#string STR_ICC_CLOCK_1_LIB_ERROR #language en-US "Bclk Settings unavailable"
|
|
|
|
#string STR_ICC_NEW_FREQUENCY1 #language en-US "New frequency [10kHz]"
|
|
#string STR_ICC_NEW_FREQUENCY2 #language en-US "New frequency [10kHz]"
|
|
#string STR_ICC_NEW_FREQUENCY_HELP #language en-US "Frequency in 10kHz increments. Frequency will be automatically rounded to nearest valid value. Allowed range is limited by Max / Min supported frequencies. Changes will not be applied unless 'Apply settings' is pressed."
|
|
|
|
#string STR_ICC_SSC_MODE_SELECTION_HELP #language en-US "Spread Spectrum Clocking mode. Determines method of clock spectrum distribution around base frequency. Changes will not be applied unless 'Apply settings' is pressed."
|
|
|
|
//
|
|
// spaces at the end of the following 4 strings are there on purpose.
|
|
//
|
|
#string STR_ICC_MODE_UP #language en-US "Up "
|
|
#string STR_ICC_MODE_CENTRE #language en-US "Center "
|
|
#string STR_ICC_MODE_DOWN #language en-US "Down "
|
|
#string STR_ICC_MODE_NONE #language en-US "None "
|
|
|
|
#string STR_ICC_SSC_NEW_PERCENT_HELP #language en-US "Clock spectrum spread in 0.01% increments. Determines spectrum deviation away from base frequency. Allowed range is limited by Max supported SSC%. Changes will not be applied unless 'Apply settings' is pressed."
|
|
|
|
#string STR_YES #language en-US "yes"
|
|
#string STR_NO #language en-US "no"
|
|
|
|
#string STR_ICC_MAX_FREQUENCY #language en-US "Maximum supported frequency"
|
|
#string STR_ICC_MIN_FREQUENCY #language en-US "Minimum supported frequency"
|
|
#string STR_ICC_CURRENT_FREQUENCY #language en-US "Current frequency"
|
|
#string STR_ICC_SSC_MODES #language en-US "Supported SSC modes"
|
|
#string STR_ICC_SSC_CURRENT_MODE #language en-US "Current SSC mode"
|
|
#string STR_ICC_SSC_MAX #language en-US "Maximum supported SSC %"
|
|
#string STR_ICC_SSC_CURRENT #language en-US "Current SSC %"
|
|
|
|
#string STR_ICC_MAX_FREQUENCY_VALUE #language en-US "many MHz"
|
|
#string STR_ICC_MIN_FREQUENCY_VALUE #language en-US "many MHz"
|
|
#string STR_ICC_CURRENT_FREQUENCY_VALUE #language en-US "many MHz"
|
|
#string STR_ICC_SSC_MODES_VALUE #language en-US "many MHz"
|
|
#string STR_ICC_SSC_CURRENT_MODE_VALUE #language en-US "many MHz"
|
|
#string STR_ICC_SSC_MAX_VALUE #language en-US "many MHz"
|
|
#string STR_ICC_SSC_CURRENT_VALUE #language en-US "many MHz"
|
|
|
|
#string STR_ICC_ZERO #language en-US "0"
|
|
|
|
#string STR_ICC_MSGBOX_BAD_PROTOCOL #language en-US "Library failed to load."
|
|
#string STR_ICC_MSGBOX_AFTER_EOP #language en-US "Library disabled after End Of Post event."
|
|
#string STR_ICC_MSGBOX_INIT_ERROR_FW #language en-US "Firmware error."
|
|
#string STR_ICC_MSGBOX_INIT_ERROR_HECI #language en-US "HECI error."
|
|
#string STR_ICC_MSGBOX_INIT_ERROR_STRANGE #language en-US "Initialization error."
|
|
#string STR_ICC_MSGBOX_FINAL #language en-US " "
|
|
|
|
|
|
#string STR_ICC_MSGBOX_NO_DYNAMIC #language en-US "Error: The change cannot be performed immediately. Try using 'permanent' option to perform clock change after reboot."
|
|
#string STR_ICC_MSGBOX_LOCKED #language en-US "Error: Overclocking registers locked, can't apply changes."
|
|
#string STR_ICC_MSGBOX_FREQ_HIGH #language en-US "Error: Frequency too high."
|
|
#string STR_ICC_MSGBOX_FREQ_LOW #language en-US "Error: Frequency too low."
|
|
#string STR_ICC_MSGBOX_SSC_HIGH #language en-US "Error: SSC parameter too high."
|
|
#string STR_ICC_MSGBOX_SSC_LOW #language en-US "Error: SSC parameter too low. Increase it or set to 0%%."
|
|
#string STR_ICC_MSGBOX_SSC_MODE #language en-US "Error: Unsupported SSC mode selected."
|
|
#string STR_ICC_MSGBOX_SSC_MODE_NOT_MATCH #language en-US "Error: Frequency and SSC mode do not match."
|
|
#string STR_ICC_MSGBOX_SSC_DISABLED #language en-US "Error: SSC is not supported for selected frequency. SSC must be set to 0%%."
|
|
#string STR_ICC_MSGBOX_SSC_CONSTANT #language en-US "Error: SSC cannot be changed."
|
|
#string STR_ICC_MSGBOX_HECI #language en-US "Error: HECI communications failed."
|
|
#string STR_ICC_MSGBOX_SUCCESS #language en-US "Success."
|
|
#string STR_ICC_MSGBOX_UNKNOWN #language en-US "Unrecognized error. Code = 0x%08x."
|
|
#string STR_ICC_MSGBOX_SUCCESS_NEED_REBOOT #language en-US "Success. Settings will take effect after reboot."
|
|
#string STR_ICC_MSGBOX_PROFILE_OUT_OF_RANGE #language en-US "Error: Profile out of range."
|
|
#string STR_ICC_MSGBOX_PROFILE_FW_ERROR #language en-US "Error: Firmware error when setting ICC profile."
|
|
#string STR_ICC_MSGBOX_LOCK_FW_ERROR #language en-US "Error: Firmware error when setting ICC Lock mask."
|
|
|
|
#string STR_ICC_CLOCK_NOT_FOUND #language en-US "Clock %d not found"
|
|
#string STR_ICC_MEI_INITIALIZATION_FAILED #language en-US "Clock %d - MEI initializion failed"
|
|
#string STR_ICC_MEI_CONNECTION_FAILED #language en-US "Clock %d - MEI connection failed"
|
|
#string STR_ICC_UNEXPECTED_FW_ERROR #language en-US "Clock %d - Unexpected fw error"
|
|
#string STR_ICC_UNSUPPORTED_HW #language en-US "Clock %d - Unsupported HW"
|
|
#string STR_ICC_DATA_NOT_AVAILABLE #language en-US "Clock %d - data not available"
|
|
#string STR_ICC_NO_USAGE_DEFINED_FOR_THE_CLOCK #language en-US "Clock %d - No usage defined"
|
|
#string STR_ICC_UNKNOWN_ERROR #language en-US "Clock %d - Library error %2X"
|
|
|
|
#string STR_ICC_CLOCK_SETTINGS #language en-US " Clock Settings"
|
|
#string STR_ICC_SSC_CHANGE_ALLOWED #language en-US "Change Allowed"
|
|
#string STR_ICC_SSC_HALT_ALLOWED #language en-US "Halt/Unhalt Allowed"
|
|
#string STR_ICC_SSC_NOTHING_ALLOWED #language en-US "None Allowed"
|
|
|
|
#string STR_ICC_OK #language en-US "Enter (OK)"
|
|
#string STR_ICC_OK_CANCEL #language en-US "Enter (OK) / Esc (Cancel)"
|
|
|
|
//
|
|
// Discrete Clk (RC26008)
|
|
//
|
|
#string STR_DCC_CPU_BCLK_FREQ_CURRENT #language en-US "Current CPU Bclk Frequency"
|
|
#string STR_DCC_CPU_BCLK_FREQ_VALUE #language en-US "100 MHz"
|
|
#string STR_DCC_CPU_BCLK_FREQ_PROMPT #language en-US "Discrete CPU Bclk Frequency"
|
|
#string STR_DCC_CPU_BCLK_FREQ_HELP #language en-US "Config Discrete Clock Frequency in MHz. Range from 80 MHz up to MAX 530 MHz."
|
|
|
|
#string STR_DCC_PEGDMI_CLK_FREQ_CURRENT #language en-US "Current Peg/Dmi Clk Frequency"
|
|
#string STR_DCC_PEGDMI_CLK_FREQ_VALUE #language en-US "100 MHz"
|
|
#string STR_DCC_PEGDMI_CLK_FREQ_PROMPT #language en-US "Discrete Peg/Dmi Clk Frequency"
|
|
#string STR_DCC_PEGDMI_CLK_FREQ_HELP #language en-US "Config Peg/Dmi Clock Frequency in MHz. Range from 80 MHz up to MAX 200 MHz."
|
|
|
|
#string STR_DISABLE_CLOCK #language en-US "External Clock Control"
|
|
#string STR_DISABLE_CLOCK_HELP #language en-US "Enable/Disable External Clock"
|
|
#string STR_BCLK_ENABLE_CLOCK #language en-US "Enable"
|
|
#string STR_BCLK_DISABLE_CLOCK #language en-US "Diable" |